Perfora Vinyl Record Storage Crate
I put special priority on using natural, eco-conscious materials.
- Only no-added-formaldehyde plywood made with soy-based glue.
- Finished with a blend of linseed oil and beeswax.
- I design my products to result in as little waste as possible.
- I ship in all paper based packing materials.
- Made Portland, OR.
Perfora - Perforate! This mesmerizing look mimics perforated sheetmetal. Each panel in this record storage crate has 80 holes cleanly milled from 1/2" baltic birch plywood. The result is an impressive 400 holes, organized in satisfying regularity. This premium design goes beyond any typical record crate or bin. A conversation piece without a doubt.
This design takes longer to build which is why it costs a little more.
Outside dimensions: 14"x14"x14"
Inside dimensions: 13"x13"x13"
A typical vinyl record sleeve is 12 1/4". It fits in this with about 3/4" wiggle room, which feels about right.
This will fit around 75-80 records, but I'd lean on the lower end so you can get your fingers in.
This will arrive wrapped in craft paper, flat and ready to assemble. Brass hardware and instructions inside.
It's quite easy to assemble and takes only a few minutes.
You can purchase several and stack them as there's enough head room to clear the top of the records.
For a varied look, mix and match with my other designs - Hex and Super Slot.
I make everything in my shop one at a time. The inventory you see is what I have made so far. If you need more than I have available just message me and I'll reserve you the next batch.
I put special priority on using natural, eco-conscious materials.
- Only no-added-formaldehyde plywood made with soy-based glue.
- Finished with a blend of linseed oil and beeswax.
- I design my products to result in as little waste as possible.
- I ship in all paper based packing materials.
- Made Portland, OR.
Perfora - Perforate! This mesmerizing look mimics perforated sheetmetal. Each panel in this record storage crate has 80 holes cleanly milled from 1/2" baltic birch plywood. The result is an impressive 400 holes, organized in satisfying regularity. This premium design goes beyond any typical record crate or bin. A conversation piece without a doubt.
This design takes longer to build which is why it costs a little more.
Outside dimensions: 14"x14"x14"
Inside dimensions: 13"x13"x13"
A typical vinyl record sleeve is 12 1/4". It fits in this with about 3/4" wiggle room, which feels about right.
This will fit around 75-80 records, but I'd lean on the lower end so you can get your fingers in.
This will arrive wrapped in craft paper, flat and ready to assemble. Brass hardware and instructions inside.
It's quite easy to assemble and takes only a few minutes.
You can purchase several and stack them as there's enough head room to clear the top of the records.
For a varied look, mix and match with my other designs - Hex and Super Slot.
I make everything in my shop one at a time. The inventory you see is what I have made so far. If you need more than I have available just message me and I'll reserve you the next batch.
I put special priority on using natural, eco-conscious materials.
- Only no-added-formaldehyde plywood made with soy-based glue.
- Finished with a blend of linseed oil and beeswax.
- I design my products to result in as little waste as possible.
- I ship in all paper based packing materials.
- Made Portland, OR.
Perfora - Perforate! This mesmerizing look mimics perforated sheetmetal. Each panel in this record storage crate has 80 holes cleanly milled from 1/2" baltic birch plywood. The result is an impressive 400 holes, organized in satisfying regularity. This premium design goes beyond any typical record crate or bin. A conversation piece without a doubt.
This design takes longer to build which is why it costs a little more.
Outside dimensions: 14"x14"x14"
Inside dimensions: 13"x13"x13"
A typical vinyl record sleeve is 12 1/4". It fits in this with about 3/4" wiggle room, which feels about right.
This will fit around 75-80 records, but I'd lean on the lower end so you can get your fingers in.
This will arrive wrapped in craft paper, flat and ready to assemble. Brass hardware and instructions inside.
It's quite easy to assemble and takes only a few minutes.
You can purchase several and stack them as there's enough head room to clear the top of the records.
For a varied look, mix and match with my other designs - Hex and Super Slot.
I make everything in my shop one at a time. The inventory you see is what I have made so far. If you need more than I have available just message me and I'll reserve you the next batch.