Tall Terne Danish Modern Nightstand
from $299.00
Sold Out
A modern Scandinavian nightstand made locally in my shop in Portland, OR.
This is the tall version of my Terne Modern Nightstand. It goes well next to a tall bed or armchair. It also could be used as an entry table or use two as a sideboard.
This has a half shelf inside which is removable, in case you want to fit larger items, like vinyl records.
You can choose one or the set of two. LH means that if facing the cabinet, the hand opening is on the left. RH is the opposite.
The outside dimensions of the box portion are 15" wide, x 15" deep, x 15" high. The legs sit 13.5" high. Total assembled height is 28.5".
The inside dimensions are 14"x14"x14". The shelf sits at 7" off the bottom.
The door hinge has a small adjustment slot for in case you need to fine tune the door gap.
Made from sustainable baltic birch plywood and finished with linseed oil and beeswax. They are almost fully assembled, I ask that you install the legs which requires inserting four screws with a slot headed screwdriver or butter knife.
I only ship in all paper and cardboard packaging to reduce my environmental impact.
This is the tall version of my Terne Modern Nightstand. It goes well next to a tall bed or armchair. It also could be used as an entry table or use two as a sideboard.
This has a half shelf inside which is removable, in case you want to fit larger items, like vinyl records.
You can choose one or the set of two. LH means that if facing the cabinet, the hand opening is on the left. RH is the opposite.
The outside dimensions of the box portion are 15" wide, x 15" deep, x 15" high. The legs sit 13.5" high. Total assembled height is 28.5".
The inside dimensions are 14"x14"x14". The shelf sits at 7" off the bottom.
The door hinge has a small adjustment slot for in case you need to fine tune the door gap.
Made from sustainable baltic birch plywood and finished with linseed oil and beeswax. They are almost fully assembled, I ask that you install the legs which requires inserting four screws with a slot headed screwdriver or butter knife.
I only ship in all paper and cardboard packaging to reduce my environmental impact.
Style:
A modern Scandinavian nightstand made locally in my shop in Portland, OR.
This is the tall version of my Terne Modern Nightstand. It goes well next to a tall bed or armchair. It also could be used as an entry table or use two as a sideboard.
This has a half shelf inside which is removable, in case you want to fit larger items, like vinyl records.
You can choose one or the set of two. LH means that if facing the cabinet, the hand opening is on the left. RH is the opposite.
The outside dimensions of the box portion are 15" wide, x 15" deep, x 15" high. The legs sit 13.5" high. Total assembled height is 28.5".
The inside dimensions are 14"x14"x14". The shelf sits at 7" off the bottom.
The door hinge has a small adjustment slot for in case you need to fine tune the door gap.
Made from sustainable baltic birch plywood and finished with linseed oil and beeswax. They are almost fully assembled, I ask that you install the legs which requires inserting four screws with a slot headed screwdriver or butter knife.
I only ship in all paper and cardboard packaging to reduce my environmental impact.
This is the tall version of my Terne Modern Nightstand. It goes well next to a tall bed or armchair. It also could be used as an entry table or use two as a sideboard.
This has a half shelf inside which is removable, in case you want to fit larger items, like vinyl records.
You can choose one or the set of two. LH means that if facing the cabinet, the hand opening is on the left. RH is the opposite.
The outside dimensions of the box portion are 15" wide, x 15" deep, x 15" high. The legs sit 13.5" high. Total assembled height is 28.5".
The inside dimensions are 14"x14"x14". The shelf sits at 7" off the bottom.
The door hinge has a small adjustment slot for in case you need to fine tune the door gap.
Made from sustainable baltic birch plywood and finished with linseed oil and beeswax. They are almost fully assembled, I ask that you install the legs which requires inserting four screws with a slot headed screwdriver or butter knife.
I only ship in all paper and cardboard packaging to reduce my environmental impact.
A modern Scandinavian nightstand made locally in my shop in Portland, OR.
This is the tall version of my Terne Modern Nightstand. It goes well next to a tall bed or armchair. It also could be used as an entry table or use two as a sideboard.
This has a half shelf inside which is removable, in case you want to fit larger items, like vinyl records.
You can choose one or the set of two. LH means that if facing the cabinet, the hand opening is on the left. RH is the opposite.
The outside dimensions of the box portion are 15" wide, x 15" deep, x 15" high. The legs sit 13.5" high. Total assembled height is 28.5".
The inside dimensions are 14"x14"x14". The shelf sits at 7" off the bottom.
The door hinge has a small adjustment slot for in case you need to fine tune the door gap.
Made from sustainable baltic birch plywood and finished with linseed oil and beeswax. They are almost fully assembled, I ask that you install the legs which requires inserting four screws with a slot headed screwdriver or butter knife.
I only ship in all paper and cardboard packaging to reduce my environmental impact.
This is the tall version of my Terne Modern Nightstand. It goes well next to a tall bed or armchair. It also could be used as an entry table or use two as a sideboard.
This has a half shelf inside which is removable, in case you want to fit larger items, like vinyl records.
You can choose one or the set of two. LH means that if facing the cabinet, the hand opening is on the left. RH is the opposite.
The outside dimensions of the box portion are 15" wide, x 15" deep, x 15" high. The legs sit 13.5" high. Total assembled height is 28.5".
The inside dimensions are 14"x14"x14". The shelf sits at 7" off the bottom.
The door hinge has a small adjustment slot for in case you need to fine tune the door gap.
Made from sustainable baltic birch plywood and finished with linseed oil and beeswax. They are almost fully assembled, I ask that you install the legs which requires inserting four screws with a slot headed screwdriver or butter knife.
I only ship in all paper and cardboard packaging to reduce my environmental impact.